All products

Piston rings

Seal the compression chamber between piston and cylinder liner, dry-running or lubricated.

Rider rings & wear bands

Carry the weight of the piston and keep metal off the cylinder liner.

Rod packing rings

Seal the piston rod where it leaves the cylinder, segment by segment.

Pressure breaker rings

Absorb pressure pulses at the front of the packing so the sealing rings behind them last longer.

Oil wiper & scraper rings

Keep crankcase oil off the piston rod and out of the compression chamber.

Valve plates, discs & seats

PEEK and filled-PTFE sealing elements for suction and delivery valves.

Guide rings

Guide the piston and rod and keep running clearances even.

Bushes, liners & wear strips

Self-lubricating bushes and liners for unloaders, gear sets and sliding parts.

Valve guides & unloader parts

Guides, lifter pistons and unloader piston rings for compressor valves.

Replacement spares for leading makes

Compatible PTFE and PEEK wear parts for the compressors already in your plant.

Compressor oil

Lubricating oils for reciprocating and screw compressors, supplied with your spares.

PTFE extruded rods

Long, continuous rods in virgin and filled PTFE, ready for machining.

PTFE moulded rods

Large-diameter compression-moulded rods for heavy machined parts.

PTFE paste-extruded tubes

Thin-wall PTFE tubing for fluid lines, sleeving and insulation.

PTFE moulded tubes & bushes

Heavy-wall tubes and bush blanks from small to very large diameters.

PTFE moulded sheets

Thick PTFE sheets for gaskets, pads and machined plates.

PTFE skived sheets & film

Thin sheets and film skived from moulded billets.

Modified PTFE (TFM-type)

Second-generation PTFE with lower creep and a smoother, less porous surface.

Chemically etched (bondable) PTFE

PTFE with an etched face that bonds to metal, wood, glass and plastics.

Bridge & structural bearing pads

Plain and dimpled PTFE sliding pads for bridges and structures.

Anti-static PTFE

Conductive PTFE that dissipates static charge.

Machined components to drawing

Any PTFE or PEEK part, machined from the right grade to your drawing.

PEEK products

PEEK sheets, rods & bushes

Virgin and filled PEEK stock in sizes as per customer needs.

FEP rods, sheets & tubing

Transparent, non-stick, excellent electrical insulation.

PFA rods, sheets & tubing

Melt-processable with PTFE-like heat and chemical resistance; UV-stable.

PCTFE rods, sheets & tubing

Hard, dimensionally stable, gas-tight — for cryogenic and high-pressure seals.

PVDF rods, sheets & tubing

Strong, abrasion-resistant and flame-retardant — for tank linings, fittings and water treatment.